|
Polycap HD
|
|
Home | Filtration Devices | Capsule Filters | Polycap HD
|
Water Flow Rates* 
*Flow rates are indicative and vary
by type of end-fitting and refer to
90% retention ratings at the
standard pore size.
Polycap™ HD (Heavy Duty) is a well-engineered product that offers high filtration efficiency and excellent filtrate purity due to its materials and methods of manufacture.
Polycap HD provides an advantage in process applications as its performance characteristics fit between gross filters and microporous membrane filters used for final filtration.
Features and benefits
- 100% polypropylene filter media, support system and housing allows usage with broad range of solutions, pH, and temperature
- High flow and high retention capacity
- Able to be sterilized by autoclaving with steam at 121°C for 20 minutes
- Manual vent with luer lock to bleed air from upstream or serve as an injection or sample port
- Available in 0.2, 0.45, 1.0, 5.0 or 10 µm pore sizes and a variety of end-fitting configurations
Applications
- Buffers
- Clean air and gas equipment
- Cosmetics and personal care products
- Food and beverage
- General fine filtration
- Inks and pigments
- Pharmaceutical solutions
- Photographic emulsions and make-up water
- Prefiltration for RO/UF/MF membranes
- Reagents
- Sample preparations
- Semiconductor and magnetic media
- Solvents
| Technical Properties - Polycap HD |
| Housing |
Polypropylene |
| Vent |
On inlet |
| Filter media |
Polypropylene |
| Support system |
Polypropylene |
| Biosafety |
Materials pass USP Class VI |
| Filtration area |
36 mm capsule: 400 cm2 (62 in2)
75 mm capsule: 820 cm2 (127 in2)
150 mm capsule: 1650 cm2 (256 in2) |
| Sterilization |
Capsules autoclavable at 121°C for 20 minutes (maximum temperature is 132°C) |
| Maximum pressure |
4.1 bar (60 psi) |
SSB - Stepped barb for 6 to 10 mm (1/4 to 3/8") tubing
1/2 SB - Stepped barb for 10 to 12 mm (3/8 to 1/2") tubing
MNPT - Male national pipe thread
FNPT - Female national pipe thread
HB - Hose barb |
| Ordering Information - Polycap HD |
| Catalog Number |
Description |
| 2610T |
Polycap HD 36, 0.2 µm, with FNPT inlet and outlet, 5/pk |
| 2610 |
Polycap HD 36, 0.45 µm, with SB inlet and outlet, 5/pk |
| 6703-3610 |
Polycap HD 36, 1.0 µm, with SB inlet and outlet, 1/pk |
| 6707-3612 |
Polycap HD 36, 1.0 µm, with MNPT inlet and SB outlet, 1/pk |
| 2611T |
Polycap HD 36, 1.0 µm, with FNPT inlet and outlet, 5/pk |
| 2611 |
Polycap HD 36, 1.0 µm with SB inlet and outlet, 5/pk |
| 6703-3650 |
Polycap HD 36, 5.0 µm, with SB inlet and outlet, 1/pk |
| 2612T |
Polycap HD 36, 5.0 µm, with FNPT inlet and outlet, 5/pk |
| 6703-3611 |
Polycap HD 36, 10.0 µm, with SB inlet and outlet, 1/pk |
| 6703-3621 |
Polycap HD 36, 20.0 µm, with SB inlet and outelt, 1/pk |
| 2613T |
Polycap HD 36, 10.0 µm, with FNPT inlet and outlet, 5/pk |
| 2614T |
Polycap HD 36, 20.0 µm, with FNPT inlet and outelt, 5/pk |
| 2710T |
Polycap HD 75, 0.45 µm, with FNPT inlet and outlet, 5/pk |
| 2710 |
Polycap HD 75, 0.45 µm, with 1/2 inch HB inlet and outlet, 5/pk |
| 6703-7510 |
Polycap HD 75, 1.0 µm, with 1/2 SB inlet and outlet, 1/pk |
| 2711T |
Polycap HD 75, 1.0 µm, with FNPT inlet and outlet, 5/pk |
| 6703-7550 |
Polycap HD 75, 5.0 µm, with 1/2 SB inlet and outlet, 1/pk |
| 2712M |
Polycap HD 75, 5.0 µm, with MNPT inlet and outlet, 5/pk |
| 2712T |
Polycap HD 75, 5.0 µm, with FNPT inlet and outlet, 5/pk |
| 2712 |
Polycap HD 75, 5.0 µm, with 1/2 inch HB inlet and outlet, 5/pk |
| 2713M |
Polycap HD 75, 10.0 µm, 5/pk |
| 2713 |
Polycap HD 75, 10.0 µm, with HB inlet and SB outlet, 5/pk |
| 6703-7511 |
Polycap HD 75, 10.0 µm, with 1/2 SB inlet and outlet, 1/pk |
| 2713T |
Polycap HD 75, 10.0 µm, with FNPT inlet and outlet, 5/pk |
| 2713 |
Polycap HD 75, 10.0 µm, with 1/2 HB inlet and outlet, 5/pk |
| 6703-7521 |
Polycap HD 75, 20.0 µm with 1/2 SB inlet and outlet, 1/pk |
| 2714T |
Polycap HD 75, 20.0 µm, with FNPT inlet and outlet, 5/pk |
| 2714 |
Polycap HD 75, 20.0 µm, with HB inlet and outlet, 5/pk |
| 6703-9502 |
Polycap HD 150, 0.2 µm, with 1/2 HB inlet and outlet, 1/pk |
| 6703-9504 |
Polycap HD 150, 0.45 µm, with 1/2 HB inlet and outlet, 1/pk |
| 2810T |
Polycap HD 150, 0.45 µm, with FNPT inlet and outlet, 5/pk |
| 2810 |
Polycap HD 150, 0.45 µm with 1/2" HB, inlet and outlet, 5/pk |
| 6703-9510 |
Polycap HD 150, 1.0 µm, with 1/2 inch HB inlet and outlet, 1/pk |
| 2811T |
Polycap HD 150, 1.0 µm, with FNPT inlet and outlet, 5/pk |
| 2811 |
Polycap HD 150, 0.45/1.0 µm, with 1/2 inch HB inlet and outlet, 5/pk |
| 2812T |
Polycap HD 150, 5.0 µm, with FNPT inlet and outlet, 5/pk |
| 2813T |
Polycap HD 150, 10.0 µm, with FNPT inlet and outlet, 5/pk |
| 2813 |
Polycap HD 150, 10.0 µm, with 1/2 HB inlet and outlet, 5/pk |
| 2814T |
Polycap HD 150, 20.0 µm, with FNPT inlet and outlet, 5/pk |
| 2814 |
Polycap HD 150, 20.0 µm, with 1/2 HB inlet and outlet, 5/pk |
|
|
|