| Technical Properties - Polycap AS |
| Housing |
Polypropylene |
| Vent |
On inlet |
| Prefilter |
Glass Microfiber double laminated with polyolefin monofilament non-woven |
| Membrane |
Nylon |
| Support System |
Polypropylene |
| Sealing |
Heat-fused |
| Maximum Pressure |
60 psi (4.1 bar) |
| Endotoxin Level |
LAL tested, ≤ 0.5 EU/mL |
| Biosafety |
Materials pass USP Class VI |
| Sterilization |
Certain filter devices have been sterilized.* Capsules may be autoclaved at 121° C for 20 minutes (maximum 132° C). However, an integrity test should be performed after autoclaving. Filling bell is not autoaclavable but is detachable (*sterile and non-sterile options offered) |
| Filtration Area |
36 mm capsule: 400 cm2 (62 in2)
75 mm capsule: 820 cm2 (127 in2)
150 mm capsule: 1,650 cm2 (256 in2) |
| IPA Bubble Point |
0.2 µm membrane: > 1.1 bar (16 psi)
0.45 µm membrane: > 0.69 bar (10 psi)
1.0 µm membrane: > 0.14 bar (3 psi) |
SB - Stepped Barb for 6-10 mm (1/4"-3/8") tubing
1/2 SB - Stepped Barb for 10-12 mm (3/8"-1/2") tubing
MNPT - Male National Pipe Thread
FNPT - Female National Pipe Thread
HB - Hose Barb